A Beginner’s Step-by-Step Guide to Installing the Luke Bidet Neo 320

Neo 320 bidet attachment

The Luke Bidet Neo 320 is a highly-rated product with great reviews and fantastic customer service. It comes with a packet full of hoses, cheap plastic wrenches, adapters, and Teflon tape, as well as a manual and quick set-up guide. The bidet itself is designed to mount on the toilet, similar to a bat, with control arms sticking out to the right. It has mounting plates that go where the toilet seat mounts and a control arm on the side.

The control panel of the Luke Bidet Neo 320 includes options for hot and cold water, with a lever on top that controls the water pressure. The installation process is straightforward and involves mounting the bidet and connecting the water lines to it. The bidet gets its cold water from the fill line on the toilet’s water tank and gets hot water from the sink under the cabinet.

Luke bidet Neo 320 Installation

It is not difficult to install the luxe bidet neo 320. However, there are a few things to keep in mind during the installation process.

First, be sure to read the instructions that come with the product. This will ensure that you install the product correctly and avoid any potential problems.

Second, be sure to follow the directions carefully. If you are not familiar with the product, it is best to ask someone who is for help.

Finally, make sure that you have everything you need before beginning the installation process. This will save you time and frustration in the long run.

With these tips in mind, installing the luxe bidet neo 320 should be a breeze.

If you have any questions or concerns about the installation process, be sure to contact the manufacturer. They will be able to help you through the process and ensure that you have a successful installation.

Tools and necessary items required for the installation of Luke bidet Neo 320

Crescent wrenchesUsed to tighten or loosen bolts and fittings
Slip-joint pliersUsed to grip and turn fittings and pipes
Needle nose pliersUsed to grip and manipulate small parts and fittings
Teflon tapeUsed to seal threads on fittings and prevent leaks
GlovesUsed to protect the hands from dirt and bacteria
Safety glassesUsed to protect the eyes from debris and any splashes during the installation process

Steps Outline of the installation process of Luke bidet Neo 320

1Turn off the water supply to the toilet tank and flush the tank until it is completely empty
2Remove the bolts that are holding the toilet seat in place
3Line up the newly cleaned mounting positions on the bidet and bolt it back down
4Disconnect the water hose going up to the toilet tank
5Install the tee adapter and insert the rubber gasket onto the top, if provided
6Connect the water supply line to the bottom of the adapter and use teflon tape on threads for a watertight connection
 Luke Neo 320 Warm Water Connection
7Locate the Water Supply
8Install a Shut-Off Valve
9Connect the Flexible Hose
10Secure the Hose
11Check for Leaks
12Adjust the Water Temperature
13Test the Bidet

Step by step instructions for installation of Luke bidet Neo 320

Luke bidet NEO 320 installation guide
credit to Luke bidet

Step-1. Turn off the water supply

To begin the installation process, the first step is to turn off the water supply to the tank and flush the tank until it is completely empty.

Step-2. Remove the bolts

The next step is to remove the bolts that are holding the toilet seat in place.

Step-3. Line up mounting positions

Once the seat is removed, the newly cleaned mounting positions should be lined up and the bidet should be bolted back down.

Step-4. Disconnect the water hose

After the bidet is securely attached, the next step is to disconnect the water hose going up to the toilet tank.

Step-5. Install the tee adapter

A tee adapter should then be installed and the rubber gasket should be inserted onto the top, if provided.

Step-6. Connect the water supply line

The water supply line should then be connected to the bottom of the adapter and teflon tape should be used on threads to ensure a watertight connection.

Luke Neo 320 Warm Water Connection:

Step-7. Locate the Water Supply:

The first step in connecting the warm water for your bidet is to locate the source of warm water. This can typically be an existing hot water line under the sink, or you may need to install a separate hot water line to the bidet.

Step-8. Install a Shut-Off Valve:

To ensure that you can easily turn off the water supply in case of any issues, install a shut-off valve near the water source.

Step-9. Connect the Flexible Hose:

Connect one end of the flexible hose to the shut-off valve and the other end to the inlet on the control unit of the bidet.

Step-10. Secure the Hose:

To prevent any leaks, use a compression nut to secure the hose to both the shut-off valve and the control unit. Apply Teflon tape on the threads for added protection.

Step-11. Check for Leaks:

After securing the hose, turn on the water supply and check for any leaks at the connection points. Tighten the connections if necessary.

Step-12. Adjust the Water Temperature:

Once the water connection is secure, adjust the water temperature to your desired level using the dial on the control unit.

Step-13. Test the Bidet:

Finally, test the bidet to ensure that it is working properly and delivering warm water.

Note: Always follow local plumbing codes and regulations when installing the warm water connection. If you’re not confident in your plumbing skills, consider hiring a licensed plumber to assist with the installation.


In summary, installing the Luke Bidet Neo 320 is a relatively straightforward process that can be completed with a few hand tools and some basic knowledge of plumbing. With its various features and options, the Luke Bidet Neo 320 is sure to provide a convenient and comfortable bathroom experience.

Similar Posts